FIRE BLANKET – GOLDEN

MAKSPRO- MAKSWELD Fiberglass Fabric Style — This Fiberglass cloth formulated for high temperature and recommended for the application like welding spatter protection, stress relieving blankets Flexible concoctors, Furnace curtains, cable and hose protection

PRODUCT IDENTIFICATION

PRODUCT NAME: fiberglass fire
blanket materials including: MFB-8150
CHEMICAL NAME AND SYNONYMS: Silicone rubber coated
fiberglass. CHEMICAL FAMILY: Silicone rubber coating/fibrous glass.

PHYSICAL DATA

BOILING POINT (f)	N/A
VAPOR PRESSURE	N/A
VAPOR DENSITY (Air = 1)	N/A
A SOLUBILITY IN WATER	N/A
APPEARANCE AND ODOR	white/golden fiberglass
SPECIFIC GRAVITY (H2O = 1)	1.1 PERCENT
VOLATILE BY VOLUME (%)	N/A
EVAPORATION RATE	N/A

MODEL NO	LENGTH	WIDTH	COLOUR	SUBSTRATE TEMP	THICKNESS
MFB-8150	50 MTR	1 MTR	WHITE/ GOLDEN	550 C	1MM (+/- 0.01 MM)

HAZARDOUS INGREDIENTS

PIGMENTS	N/A	BASE METAL	N/A	ALLOYS	N/A
CATALYST	N/A	METALLIC COATING	N/A	ADDITIVES	N/A
SOLVENTS	N/A	FILLER METAL PLUS	N/A	COATING OR CORE PLUS:	N/A

OTHERS: Hazardous mixture of other liquids, solids, or gases. Liquid coating contains Cj’s Dimethylpolysiloxane – less than
2%, TLV units not known. While this material is in the coating base, the vulcanized state precludes it from being hazardous.

FIRE AND EXPLOSION HAZARD DATA

FLASH POINT	N/A
EXTINGUISHING MEDIA	Coating only – All standard fire fighting media.
SPECIAL FIRE FIGHTING PROCEDURES	Coating only – normal smoke protection.
UNUSUAL FIRE AND EXPLOSION HAZARDS	None

HEALTH HAZARD DATA

THRESHOLD LIMIT VALUE: NOISH classifies fibrous glass as a nuisance particulate.
EFFECTS OF OVEREXPOSURE: Recommended TLV 3×106 fibers/m3. Not listed as a carcinogenic.

EMERGENCY FIRST AID PROCEDURES

INHALATION: None required.
SKIN: Wash with soap and running water.
EYES: Flush with running water for at least 15 minutes.

REACTIVITY DATA

STABILITY: Stable.
CONDITIONS TO AVOID: INCOMPATIBILITY (Materials to avoid): None.
HAZARDOUS DECOMPOSITION PRODUCT: Will not occur.
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: None.

SPILL OR LEAK PROCEDURES

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: N/A
WASTE DISPOSAL METHOD: Consult certified
material disposal contractor.

SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION INFORMATION: Dust mask if material is machined. .
LOCAL EXHAUST: N/A
MECHANICAL (General): N/A
PROTECTIVE GLOVES: As required.
EYE PROTECTION: Industrial regulations require eye protection at all times.
OTHER PROTECTIVE EQUIPMENT: As required.
OTHER: N/A
SPECIAL: N/A

OTHER INFORMATION

Europe BSEN 476 PART 7
European Union CE
America FM/ANSI 4950