PVC COATED FIBERGLASS FIRE BLANKET

PVC Coated Fiberglass Fire Blanket has the excellent merit such as anti-burns, anti-corrsion, heat insulation, minimumm eloganate skrinkage, high intensity. It is widely used in aircraft and spaceflight indusdry, ship industry chemical, medical & military industry. It is available in manufacturing surf board, sailboard, ice stick, welding blanket etc.

PRODUCT NAME : Pvc Coated Fireblanket

BLANKET MATERIALS INCLUDING MODEL NO : OPFB 5150-430, OPFB5150 – 480, OPFB51550

CHEMICAL NAME AND SYNONYMS : PVC COATED FIREBLANKET/FIBERGLASS

CHEMICAL FAMILY : PVC COATING/ FIBROUS GLASS

Hazardous Ingredients:

PIGMENTS : N/A	BASE METAL : N/A	ALLOYS : N/A
CATALYST : N/A	METALLIC COATINGS : N/A	ADDITIVES : N/A
SOLVENTS : N/A	FILLER METAL PLUS: N/A	COATING OR CORE PLUS : N/A

OTHERS : Hazardous mixture of other liquids, solids, or gases. Liquid coating contains Cj’s Dimethylpolysiloxane – less than
2%, TLV units not known.While this material is in the coating base, the vulcanized state precludes it from being hazardous.

Physical Data:

BOILING POINT (f)			N/A
VAPOR PRESSURE			N/A
VAPOR DENSITY (Air = 1)			N/ASOLUBILITY IN
WATER			N/A
APPEARANCE AND ODOR			WHITE/GOLDEN FIBERGLASS
SPECIFIC GRAVITY (H2O = 1)			1.1
PERCENT VOLATILE BY VOLUME (%)			N/A
EVAPORATION RATE			N/A

FIRE & EXPLOSION HAZARD DATA:

FLASH POINT			N/A
EXTINGUISHING MEDIA			Coating only – All standard fire fighting media
SPECIAL FIRE FIGHTING PROCEDURES:			Coating only – normal smoke protection
APPEARANCE AND ODOR			WHITE/GOLDEN FIBERGLASS

HEALTH HAZARD DATA

THRESHOLD LIMIT VALUE			NOISH classifies fibrous glass as a nuisance particulate.
EFFECTS OF OVEREXPOSURE:			Recommended TLV 3×10 6 fibers/m3 . Not listed as a carcinogenic

EMERGENCY FIRST AID PROCEDURES

INHALATION			None required
SKIN			Wash with soap and running water.
EYES			Flush with running water for at least 15 minutes

REACTIVITY DATA

STABILITY			Stable
CONDITIONS TO AVOID			None
HAZARDOUS DECOMPOSITION PRODUCT			Will not occur
HAZARDOUS POLYMERIZATION			Will not occur

SPILL OR LEAK PROCEDURE

STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: N/A

WASTE DISPOSAL METHOD: Consult certified material disposal contractor.

SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION INFORMATION			Dust mask if material is machined.
LOCAL EXHAUST			N/A
MECHANICAL (General)			N/A
PROTECTIVE GLOVES			As required.
EYE PROTECTION			Industrial regulations require eye protection at all times.
OTHER PROTECTIVE EQUIPMENT			As required
SPECIAL			N/A

OTHER INFORMATION

Europe BSEN 476 PART 7
European Union CE
America FM/ANSI 4950